Ferrite Cores
For High Frequency Welding
Impeder Cores IPH Series
IMPEDERS FOR HIGH FREQUENCY WELDING
An impeder core is an essential accessory for the welding of tubes and pipes using high frequency waveguide heating. The characteristics and durability of the impeder core have a significant effect on the efficiency and stability of the welding process. Thanks to advances in technology and experience gained from manufacturing with IP1 (TDK’s previous impeder material), the new IPH material provides high efficiency, energy savings, and long lifetimes.
APPLICATIONS
Pipe welding
FEATURES
IPH has a much lower reluctance than IP1 (60% lower according to our measurements). The result is that internal heating, which reduces the saturation magnetic flux density, can be suppressed, and the welding process is very efficient.
PIPE WELDING USING AN IMPEDER CORE
The impeder core concentrates the magnetic flux generated by the work coil into the area of the pipe joint. Consequently, use of an impeder core massively increases the efficiency of the welding process.
IMPEDER CORES
Core loss vs. Temperature
Saturation magnetic flux density vs. Temperature
TYPE
|