Device description
Function
The cable extension is part of an atmospheric pressure plasma generator used for atmospheric plasma treatment or pretreatment of a very wide variety of material surfaces.
It is designed for industrial applications where, for example, surfaces are activated with plasma and cleaned prior to printing, bonding or painting. The application of surface coatings is also possible.
The device is also suitable for laboratory operation by instructed personnel.
|
Designation
|
Value
|
|
Permanent operating voltage:
|
maximum 6 kV peak
2KV（ average operating voltage ）
|
|
test voltage (inner conductor)
|
16 KV/DC 5 minutes
|
|
test voltage (inner conductor
/ 1. shielding)
|
16 KV/DC 5 minutes
|
|
test voltage (1. and 2. shielding)
|
2,5 KV/DC
|
|
capacitance
|
89,5 pF/m
|
|
Working voltage of plasma generator
|
• up to 20 kV (max. voltage during ignition, short time)
• up to 2 kV(average operating voltage)
|
|
Mass
|
|
• cable extension
|
1,2 kg; 2.65 lbs
|
|
Minimum bending radius of HV cable
|
120 mm; 4.72"
|
|
maximum torsion
|
±180°/2m
|
|
Length
|
8000 mm; 315" or 9000mm; 354" depending on configuration
Other lengths only after agreement with relyon plasma GmbH.
→ Other lengths may lead to an adaption of the power source
|
|
Limit temperature
|
|
• cable extension
|
≤ 80 °C; 176 °F
|
|
Operating conditions
|
|
• Air humidity
|
< 80% rel. (non-condensing)
|
|
• Temperature
|
10 – 40 °C; 50 – 104 °F
|
|
Storage conditions
|
|
• Air humidity
|
< 80% rel. (non-condensing)
|
|
• Temperature
|
0 – 60 °C; 32 – 140 °F
|
|
